The DSP series dual-meter pedestals are vandal and weather resistant enclosures made entirely of 14-gauge stainless steel, using welded construction and having a #4 brushed finish. The meter section is located at the top-front of the pedestal and houses EUSERC approved meter sockets and test blocks. The top cover lifts up to provide clear access to meter socket and test blocks. Fully hemmed construction eliminates the potential for sharp edges. The top cover is attached using two heavy-duty 3/8” stainless steel bolts that when removed, allow complete removal of the top cover if necessary. Two replaceable 3/16” thick Lexan viewing windows are provided for meter reading. The meter section accepts ring style meters, and the meter face may be removed without disconnecting the meter bulb. The customer section is located on the lower front of the pedestal. This section is outfitted with a continuously welded and fully hemmed stainless steel door that is secured with a T-handle style latching system. The door includes a full length piano hinge installed using carriage bolts. The compartment houses two load centers with over current protective devices. A dead front panel is included to guard against exposure to live electrical circuits. The utility landing section is located on the rear side with a removable panel for full access to the landing lugs. The landing lugs are made of aluminum using hexagonal screws for tightening. All doors are equipped with watershed drainage channels and provisions for a padlock, ensuring a watertight and vandal resistant design. The entire enclosure is rated Type 3R, UL508A listed and complies with EUSERC electrical standards and current NEC codes.
