Light Duty Cabinets

• 100% stainless steel construction assures long-term, rustproof durability and additional strength
• Flush mounted removable door with keyed camlock,
• Chameleon effect of the natural brushed stainless steel finish provides an unobtrusive quality
• Filtered side louvers at bottom and top allow passive cross flow ventilation
• Removeable backboard for easy component installation
• Mounting template, stainless steel anchors and instructions included
• Ten year limited warranty
• NEMA TYPE 3R rated UL Listed
• All stainless steel enclosures may be powder coated in various colors at an additional charge



Product CodeDimensionsWeight
LD-16S16.75"w, 30"h, 8.25"d43lbs
LD-16SW (Wall Mount)16.75"w, 30"h, 8.25"d48lbs
LD-18SW (Wall Mount)18.5"w, 18.5"h, 8"d31lbs
LD-16T (Wall Mount)16.75"w, 18.5"h, 8"d25lbs


The cabinet shall be of a weather resistant nature manufactured entirely of stainless steel. The main housing shall be louvered upper and lower body to allow for cross flow ventilation. Filter screens shall cover all louvers to deflect against water spray, insects and dust. A stainless steel backboard shall be provided for the purpose of mounting electronic and various other types of equipment. The backboard shall be mounted on four stainless steel bolts that will allow for removal of the backboard. A stainless steel cam style lock shall be mounted in the door. The cabinet shall be equipped with a teardrop shaped, hollow center, watertight, thermoplastic door seal. The above described product shall be a NEMA TYPE 3R Rainproof Enclosure as listed by Underwriter Laboratories, Inc.

  • Our Controller Subassembly includes 120 volt, 15 amp, ground fault protected duplex box with receptacle & locking switch: flexible conduit & condulet; & terminal strips with placards
  • The Thermostatically Controlled Fan is easily installed & can be adjusted in the field to help maintain desired enclosure temperature
  • The Rain Switch Enclosure is designed to protect WCS & Mini-Click Rain Switches from vandalism
  • The Pole Mount Rain Switch Enclosure mounts to 2” galvanized pipe
  • Solar Sync Cover is designed to protect Solar Sync switches from vandalism & made to attach to Strong Box enclosures with gasket seal

Controller Subassembly

CSA 36 Stations 5lbs
CSA-52 52 Stations 6lbs

Thermostatically Controlled Fan

OPT-FAN To help maintain desired enclosure temperature 4lbs

Rain Switch Enclosures

RGVRSS Designed to protect WCS and MiniClick-C rain switches from vandalism 2lbs
RGVRSS-P Pole Mount – Designed to protect WCS and MiniClick-C rain switches from vandalism 4lbs
SRSE Solar Sync Cover 1lbs

Register with StrongBox or Log-in if you have an account.