This meter pedestal and enclosure combination is a vandal and weather resistant enclosure formed entirely from stainless steel with a #4 brushed finish. The meter section is located on the top of the pedestal and houses a meter socket and test blocks. The top section uses a side swing style door to fully expose the meter compartment for ease of access to the meter and test blocks. The top is supported by 3 large stainless steel hinges with 1/4” “lift off” style pins that allow the top to be completely removed. A replaceable 5 x 10 inch, 3/16 inch-thick Lexan viewing window is provided for meter reading. The utility compartment is located on the right side of the enclosure and houses the landing lugs. The 20 x 30 inch customer electrical compartment is located on the left side and is capable of housing up to a 26 circuit load center with a removable dead front protective panel. A stainless steel electrical backboard is provided for ease of wiring and grounding of electrical components. The customer compartment is outfitted with a continuously welded and hemmed, stainless steel door that uses a T handle latching system. All doors are equipped with watershed drainage channels and provisions for a padlock, ensuring a watertight and vandal resistant design. A SB-1852SS enclosure is attached to the back of the meter pedestal for additional storage and mounting additional electronic equipment. This metered pedestal and enclosure are NEMA 3R rated and UL 508A listed.
