Log in

UNMETERED PEDESTAL (PWP)

Literature

PWP METER OVERVIEW PWP INSTALLATION

Drawings

Product Drawings are only available to approved users. Please login or register to access.

PWP-12016-65

The PWP-12016-65 is a stainless steel commercial power pedestal measuring 17 inches wide, 31 inches high and 17 inches deep. The power pedestal is ideal for events, parks and other applications where electricity is metered upstream. With allowance for 200 main amps, 120/240 volts and up to 16 breaker positions, this small pedestal packs a big punch. A stainless steel electrical backboard is also provided for ease of wiring and grounding of electrical components. All doors are equipped with watershed drainage channels and padlock provisions ensuring the enclosure is watertight and vandal resistant. This enclosure is NEMA 3R rated and UL 508A Listed.

PRODUCT SPECIFICATIONS

Material	304 Stainless Steel
NEMA Rating	TYPE 3R
Overall Dimensions	17.17 x 31.02 x 16.67 inches
Customer Section usable Area	14.50 x 11.00 x 6.50 inches
Main Amps	200
Voltage	120/240
Phase	1
Wires	3
AIC Rating	65,000
Breaker Positions	16
Weight	140 lbs
Security Provisions	Padlock Provisions
Hardware	Anchor Bolts
Warranty	10 Years
UL Listed	508A (File #E162786)

CONSTRUCTION

This power pedestal is a vandal and weather resistant enclosure formed entirely from stainless steel with a #4 brushed finish. The utility landing section is located on the rear side with a removable panel for full access to the landing lugs. The landing lugs are made of aluminum using hex drive screws for tightening. The 17 x 30 inch customer electrical compartment is located on the front and is capable of housing up to a 16 circuit load center with a removable dead front protective panel so that only the breaker switches are exposed. A stainless steel electrical backboard is provided for ease of wiring and grounding of electrical components. The customer compartment is outfitted with a continuously welded and hemmed, stainless steel door that uses a T-handle latching system. All doors are equipped with water shedding drainage channels and provisions for a padlock, ensuring a watertight and vandal resistant design. This enclosure is NEMA 3R rated and UL 508A listed and complies with current NEC codes.