Log in

QUICKPAD™

Literature

QUICKPAD OVERVIEW QUICKPAD INSTALLATION

Drawings

Product Drawings are only available to approved users. Please login or register to access.

QP-16

The QP-16 is a control enclosure mounting pad system for easy installation of StrongBox enclosures with no concrete needed. This two-piece support system measures approximately 36 inches wide, 16 inches high, and 22 inches deep. The marine-grade aluminum mounting pad includes a cutout measuring 13 inches by 10.50 inches for easy connection of conduit into the base of the enclosure. The buried support system provides added stability and security for the entire assembly. Patent No. 6,321,928.

PRODUCT SPECIFICATIONS

Mounting Pad Material	3/16 inch 5052 H32 Marine Grade Aluminum
Support Base Material	Reinforced Plastic
Overall Dimensions	35.6 x 16.0 x 22.0 inches
Mounting Pad Dimensions	28.5 x 18.5 inches
Conduit Cutout Dimensions	13.0 x 10.5 inches
Weight	37 lbs
Hardware Material	Stainless Steel

CONSTRUCTION

The controller enclosure mounting pad assembly shall consist of a reinforced plastic support base, a three sixteenth inch thick 5052 H32 Marine Grade Aluminum mounting pad and stainless steel fastening brackets. The support base shall be installed and compacted in earth allowing the top two inches of the support base to be exposed above the earth. The 5052 H32 Marine Grade Aluminum mounting pad shall be clamped to the support base with the stainless steel fastening brackets. The controller enclosure shall be bolted from the inside of the enclosure to the mounting pad, thus preventing outside access to the mounting bolts.