This meter pedestal and enclosure combination is a vandal and weather resistant enclosure formed entirely from stainless steel with a #4 brushed finish. The meter section is located on the top of the pedestal and houses a meter socket and test blocks. The top section uses a side swing style door to fully expose the meter compartment for ease of access to the meter and test blocks. The top is supported by 3 large stainless steel hinges with 1/4” “lift off” style pins that allow the top to be completely removed. A replaceable 5 x 10 inch, 3/16 inch-thick Lexan viewing window is provided for meter reading. The utility compartment is located on the right side of the enclosure and houses the landing lugs. The 20 x 30 inch customer electrical compartment is located on the left side and is capable of housing up to a 20 32 circuit load center with a removable dead front protective panel. A stainless steel electrical backboard is provided for ease of wiring and grounding of electrical components. The customer compartment is outfitted with a continuously welded and hemmed, stainless steel door that uses a T handle latching system, hidden behind a flush mounted access door. All doors are equipped with watershed drainage channels and provisions for a padlock, ensuring a watertight and vandal resistant design. An SB-1852SS enclosure is attached to the back of the meter pedestal for additional storage and mounting additional electronic equipment. See Page 4 for specifications on the SB-1852SS. This metered pedestal and enclosure is are NEMA 3R rated and UL 508A listed.
*EUSERC 308 Compliance does not include ringless option.
METER MOUNTING BASE – MPS, MPE, CSP, and DSP Meter Series | 100% Stainless Steel construction for long lasting durability and corrosion resistance.
Time Clock
MPS, CSP, and DSP Meter Series
Intermatic ET-Series | 1,2, and 4 channel options available
Photocells
MPS and CSP Meter Series
Ripley 6390TF with bypass switch included
Contact Block
MPS and CSP Meter Series
GE 30A Modular Contactors | 2P,4P,6P,8P,10P, and 12P options available
Two (2) GE Modular Contractors can be individually configured for two(2) to twelve(12) poles each
Branch Breakers
Contact factory for available options
In order to view the drawings, you must register with StrongBox.