DOWNLOAD SPECIFICATION SHEET
|SB-16SS||16"w, 38"h, 15.5"d||85lbs|
24"w, 38"h, 17"d
The enclosure shall be of a vandal and weather resistant nature manufactured entirely of stainless steel. The main housing door shall be louvered at the bottom and equipped with a tear drop shaped, hollow center thermoplastic door seal.
The entry lid shall be louvered on the back side to allow for cross flow ventilation. Filter screens shall cover all louvers to deflect against water spray, insects and dust. The top entry lid shall be assisted by two gas springs for easy access. The edge of the lid shall be hemmed to eliminate any sharp edges. The top entry lid shall have a continuous stainless steel piano hinge, carriage bolted on the rear, and a three point locking mechanism on the front.
A stainless steel cam style lock shall be mounted in the lid and a provision for a padlock shall be included within the locking mechanism. A removable stainless steel tray shall be provided for the purpose of mounting electronics and various other types of equipment. A removable stainless steel backboard shall be provided in the lower body and mounted on four stainless steel bolts. The inside door area shall provide adequate storage for plans, operating instructions, and scheduling information. The above described product shall be a NEMA TYPE 3R Rainproof Enclosure as listed by Underwriter Laboratories, Inc.
- Our Controller Subassembly includes 120 volt, 15 amp, ground fault protected duplex box with receptacle & locking switch: flexible conduit & condulet; & terminal strips with placards
- The Thermostatically Controlled Fan is easily installed & can be adjusted in the field to help maintain desired enclosure temperature
- The Rain Switch Enclosure is designed to protect WCS & Mini-Click Rain Switches from vandalism
- The Pole Mount Rain Switch Enclosure mounts to 2” galvanized pipe
- Solar Sync Cover is designed to protect Solar Sync switches from vandalism & made to attach to Strong Box enclosures with gasket seal
Thermostatically Controlled Fan
||To help maintain desired enclosure temperature
Rain Switch Enclosures
||Designed to protect WCS and MiniClick-C rain switches from vandalism
||Pole Mount – Designed to protect WCS and MiniClick-C rain switches from vandalism
||Solar Sync Cover