
High Profile Aluminum Two Piece Enclosure
VANDAL RESISTANT EASY ACCESS BACKFLOW ENCLOSURE
- Marine grade aluminum alloy construction
- 100% stainless steel hardware assures long-term rust proof durability and additional strength
- Full release locking mechanism requires no tools and provides easy access for service and repair
- Flush-mounted locking mechanism and sollid sheet construction ensures maximum security
- Chameleon effect of the natural finish provides an unobtrusive quality
- Five year limited warranty
- All aluminum enclosures may be powder coated in many colors at an additional charge
DOWNLOAD SPECIFICATION SHEET
PHYSICAL
Product Code | Dimensions | Weight |
---|---|---|
SBBC-40ALHP | 40"l, 39"h, 24"w | 88lbs |
SBBC-60ALHP | 60"l,39"h, 24"w | 118lbs |
SBBC-75ALHP | 75"l, 39"h, 24"w | 128lbs |
SBBC-90ALHP | 90"l, 39"h, 24"w | 158lbs |
CONSTRUCTION
The backflow enclosure shall be of a vandal and weather resistant nature manufactured entirely of marine grade aluminum alloy 5052-H32, with a wall thickness of one eighth inch. The mounting base shall be manufactured entirely of stainless steel. The main housing shall be of solid sheet construction punched on the sides with a rectangular pattern for viewing back flow operation. The enclosure shall be a center split design, having mounting lips on each end. The mounting base shall be sub- merged into the concrete a minimum of two inches, positioning the enclosure one and one half inches above the concrete for drainage purposes. The locking mechanism shall be of the full release type which allows for complete removal of the enclosure from its mounting base with- out the use of tools. The locking mechanism shall be a Stainless Steel Cross Bar style and provide for a padlock.
- Our Controller Subassembly includes 120 volt, 15 amp, ground fault protected duplex box with receptacle & locking switch: flexible conduit & condulet; & terminal strips with placards
- The Thermostatically Controlled Fan is easily installed & can be adjusted in the field to help maintain desired enclosure temperature
- The Rain Switch Enclosure is designed to protect WCS & Mini-Click Rain Switches from vandalism
- The Pole Mount Rain Switch Enclosure mounts to 2” galvanized pipe
- Solar Sync Cover is designed to protect Solar Sync switches from vandalism & made to attach to Strong Box enclosures with gasket seal
![]() |
Controller Subassembly
|
![]() |
Thermostatically Controlled Fan
|
![]() |
Rain Switch Enclosures
|
Register with StrongBox or Log-in if you have an account.